Encouraging Growth Mindset in Students with Robotics

Posted on March 24, 2016 by Tom Adams

In 2015 our Preparatory School teachers began integrating robotics into the curriculum. We have blogged about it previously here, and here. 2016 has seen the continuation of introductory sessions with all year 7 classes, where they investigate the basic functionality of their EV3 robots – such as making the robots move forward, and turn.

Of particular interest to me, was how has this initial enthusiasm for robotics manifested itself into the everyday curriculum delivery of the Preparatory School. I was excited to hear about the way a Year 7 teacher, Mrs Kelly McBride, was

Mrs Kelly McBride

utilising the robots to help her students apply their knowledge of regular polygons.

Developing Growth Mindset Through Perserverence

Having spent some time teaching her students the characteristics and properties of various polygons, Mrs McBride set the class a challenge – ‘Can a robot draw a perfect polygon?’

In order for Technology to be appropriately integrated into planning, it is important that the tool selected complements the desired learning outcomes. Having introduced the new learning, the children were now required to apply it, and integrate it with their basic knowledge of robotics.

The development of a Growth Mindset is facilitated by resilience, and a love of learning. The first lesson in this series became a trial and error session as students had to persevere to respond to the slight differences in response between individual robots, in terms of the amount of turning they observed in response to particular programming commands.

“It was great to be able to develop a task that incorporated three different aspects of learning; a growth mindset, application of Robotics, and their learning about the properties of Polygons” – Mrs McBride

Year 7 Students drawing a square with a robot

Getting the Robot to Draw

Once the students had ironed out the nuances of their robots they were able to meet their first challenge – to get their robot to draw a perfect square. This challenge required even more perseverance for the students to complete perfect right angles with their squares. Mrs McBride observed students completely engrossed in their tasks, as they strove for perfection.

“It was fun having to actually calculate the degrees and try and get the robot to do it – try and fail, try and fail….then finally succeed.” – Grace, Year 7

For the groups that tasted success early, they were presented with a second, and much more complex, challenge – to get their robot to draw an oval, or a hexagon. This challenged the students to apply their understanding of these different shapes, and the properties of each, before then programming their robot to produce the shape.

“Instead of boring old maths, we had fun working out how to get the robot to draw for us” – Reeve, Year 7

Successful Integration of Technology into Teaching

It is easy to introduce an engaging tool like Robotics to students. What is more difficult, and what I am much more interested in celebrating, is when a teacher can take that tool, and create a series of lessons which authentically integrate that particular technology into the curriculum. I feel that that is exactly what Mrs McBride has achieved here. She has planned an engaging, relevant, and scalable task – which has challenged her students to contribute to their own learning.

“The students lost track of time they were so engaged – working until they had solved the problem” – Mrs McBride

Networked Projectors Offer Easy Access

Posted on March 24, 2016 by Sam McNeill

This post was originally published on the Interface Magazine Online website – you can read the original post here.

How often do you want to access the internet but can’t because your device is connected via Wi-Fi to the classroom projector? It’s one or the other … but not both. St Andrew’s College has worked with Epson to find a way to do things differently.

“Epson gave us some sample units, and we trialled some existing units in our preparatory school before we did a major upgrade,” said the College’s Director of ICT Sam McNeill, noting the units were in place for six months. “We wanted proof of the concept.”

By Term 4 last year, the College had rolled out 35-40 Epson EB-535W short-throw projectors.

“One of the key drivers for upgrading to networked projectors was our use of OneNote,” explained McNeill. “We’re gradually becoming a compulsory BYOD school and the majority of teachers now choose a Microsoft Surface Pro 3 or 4. Because we use OneNote, everything that goes up onto a projector screen also gets automatically saved for later in the students’ notebooks.”

Two underlying needs for a projector upgrade were also present, the first being teachers wanting not to be tethered to a projector by a VGA or HDMI cable. The second, more importantly, was St Andrew’s experiences with other technologies.

“We’ve played around with WiDi and Miracast devices, and had varied results.

“The Netgear Push2TV worked okay but still had interference issues because we had 30-40 devices in a classroom,” recalled McNeill. “The ScreenBeam dropped out from time to time, and had some security issues. Also, the pairing process between Miracast and a Windows 8.1 or 10 device was challenging for some teachers.”

This slideshow requires JavaScript.

Epson’s EB-535W projectors are networked and have their own IP address which is displayed on the projector’s screen, and a signal is received from a teacher’s Surface Pro via the school’s wireless network. Rather than going from one device to another (point-to-point), this allows for a highly stable connection, not unlike live internet streaming.

St Andrew’s separates all projector traffic on to a separate VLAN (with a dedicated switch), meaning it was isolated and would never affect general school-wide Wi-Fi speeds. All installation of the projectors was done by the in-house ICT team.

Enticingly, Epson’s projectors did not require a network upgrade, they could be used on the existing wireless infrastructure.

“We wanted to be able to use them for the internet and project the teacher’s screens at the same time. What we like about the Epson is, you don’t have to fiddle around with the Windows configuration. It has its own standalone software (EasyMP), and it just works.

Just one downside has come with the roll-out of Epson’s projectors.

“The trade-off in all of this is that video frame rate is reduced,” added McNeill. “If a teacher wants to play a movie, they’ll need to connect through HDMI for an optimal experience.”

St Andrew’s is using Epson’s advanced networking solutions with its projectors in various ways.

“We have the central management software, which allows us to see how the projectors are running, when bulbs blow, and see how teachers are connecting, all from our ICT office. We even have a scheduled off function, in case teachers forget to turn theirs off.”

Currently, the projector network is only accessible by teachers, not by students.

“It is possible, under moderator control from the teacher, but we haven’t had the teacher demand for it at this stage. Perhaps when they become more fluent and familiar with using wireless projectors, they’ll see the value in students’ BYOD devices projecting to it.”

St Andrew’s College is in Merivale, Christchurch. With a roll of 1,350, it’s a fully-independent, co-educational school for pre-school to Year 13 day and boarding students.

Duncan Ferguson – Apple Distinguished Educator 2016

Posted on March 18, 2016 by Sam McNeill

Mr Duncan Ferguson

Congratulations to St Andrew’s College’s Head of Music Mr Duncan Ferguson who has been selected as an Apple Distinguished Educator for 2016.

Mr Ferguson is one of five New Zealanders to be selected to attend the Apple Distinguished Educators conference in Berlin, Germany.

Attending an ADE Institute provides powerful opportunities for collaboration and ongoing professional growth for ADE alumni members. This 4-day intensive professional learning experience, will bring 400 ADEs together to collaborate, share, and learn. By collaborating directly with peers from across the world, ADEs will return home with a shared sense of purpose as they develop content and promote powerful ideas for improving teaching and learning worldwide.

To see the iBook about Collaborative Composition that Mr Ferguson wrote as a result of the 2015 ADE Institute in Singapore please visit:

https://itunes.apple.com/nz/book/collaborative-composition/id1052956067?mt=13

Congratulations and have a great trip to Berlin!

Staff Profile – John Quealy

Posted on March 16, 2016 by Tom Adams

Mr John Quealy

Throughout 2016, I am going to be profiling a number of different St Andrew’s College staff. The first of these was a post that I wrote a few weeks ago about Ms Donna Jones, in the English department. The subject of this post, is Mr John Quealy, a teacher in our Mathematics department.

We have previously blogged about some of the great Teaching and Learning that occurs in this department. This week I had the pleasure of chatting to Mr Quealy, and the Head of Department, Mr Mitch Howard, about the work they are doing to redesign the content and delivery of the Year 11 General Mathematics Course. This course focuses on the practical application of mathematics in everyday life and achieving Numeracy. For students working towards level 5 of the New Zealand curriculum with the opportunity to progress to NCEA Level One Achievement Standards.

Mr Mitch Howard HOD Mathematics

Due to the nature of this particular Year 11 course, and the specific learning needs of the group of students enrolled in the course, a few deliberate changes have been made in 2016. As this group of students are in a 1:1 computing environment, the decision was made to increase the role of the device in the course. The pleasing aspect of this course development was that this increased use of technology was not simply as a direct substitute from the original textbook and exercise book model used in the past, but included the deliberate integration of technology into specific, and most importantly authentic, learning tasks.

Working collaboratively, Mr Quealy and Mr Howard identified that these particular students would benefit from more practical and hands-on learning. An example was the Number topic that they are currently working on.

Practical applications of Number in Mathematics

Example of a student’s food diary, ready for analysis

To give this topic a more practical application the decision was made to embed this important learning into a wider topic around food, and food labeling. Students have been using Microsoft Excel to keep a food diary, which they have embedded into their OneNote class notebook. The benefit of this was that it allows Mr Quealy to access the students’ work and provide the extra feedback, and assistance that certain students require.

The second benefit from using Excel in this situation was that the students were able to develop the basic skills required to complete basic formula, such as percentages and decimals, and data display within Excel through tables and graphs.

“It is great to be able to engage students with real life activities that they can hook onto and see the relevance of life long skills” – Mr John Quealy

The content library in the class OneNote being used to model what is expected.

Mr Howard shares the same sentiments, particularly about the benefits of these students engaging with their devices.

“Numeracy is about being able to use numbers in an everyday setting. If this is the last Mathematics course that these students do, we want it to be useful and practical. We want to be able to teach these students how to use spreadsheets for calculations and organising their thinking. Also if a person is comfortable using a spreadsheet, they will be comfortable using most software that they might be asked to use in a workplace.” – Mr Mitch Howard

The benefits of Collaboration between classes

Another clear benefit of this new, computer based course, is that it allows the teachers of both Y11 General Mathematics courses, Mr Howard and Mr Quealy, to collaborate in the planning, delivery and reflection stages of the topic. By having access to each other’s class notebooks, they can keep in close contact, and share ideas, all while obviously maintaining the differences that their individual teaching styles, and student’s needs require.

“It’s also great to be able to collaborate with John, bouncing ideas off each other and seeing which ideas have worked or not. John’s architectural knowledge will be great for when we do our measurement unit on autocad.” – Mr Mitch Howard

A department constantly developing their practice

Within the Mathematics department there are an increasing range of eLearning tools being utilised. There are a small number of staff who run flipped classroom, while others are experimenting with Microsoft Surface tablets. What I particularly liked in this example was the fact that the technology is being used to allow teachers to work more closely together, and use their shared expertise and experience to improve the learning, and engagement, of their students.

It is great to see the increasing engagement with Technology within the department, and I look forward to documenting their innovations in later Blogs.

Guest Post: The Ideal Setup For A School Recording Studio

Posted on March 10, 2016 by Sam McNeill

This is a Guest Post from our Head of the Music Department Mr Duncan Ferguson who is also an Apple Distinguished Educator for 2015. He has posted here before about the integration of technology and music as well as project based learning approaches in Music. You can read the original post here.

Last year I was lucky enough to be granted the Head of Independent Schools Scholarship Trust award. This enabled me to travel to San Francisco and NYC to study how Music Technology is successfully being incorporated into high schools.

As a result of this study I have produced a document called The Music Educators Technology Survival Guide. This is a free download and takes you through recommended equipment required to setup up a music technology programme in your high school. It also provides an overview of the requirements for the NZQA Unit Standards, which you may use to assess your students’ music technology skills.

However, it’s one thing to have all the gear for teaching music technology but I’ve found the physical makeup of your studio/recording/mixing spaces, are critical to student success.

Of course, the quality of the acoustics in your recording space(s) is one of the most important factors but unless you’re involved in a new build of your department there may not be a huge amount you can do (whatever you do, don’t put egg cartons on your walls, they will only make things worse!).

But if you are lucky enough to plan a new setup this is what I recommend you aim for when you’re trying to record a rock band.

Some important things to note:

All the musicians (apart from the singer) are recording in the same room at the same time but the only instrument that is actually mic’ed up in the recording room is the drum kit.
The guitar signal is recorded via a DI box, which is then outputted to an amplifier in a separate ‘amp’ room (using a specialized reamp device). The guitar amp is mic’ed up with one or two mics and those signals are then returned to the recording system. The guitar amp signal is then fed back to the musicians via headphones.
The bass player is recorded via a DI box with the signal returned to the musicians headphones. The bass track usually sounds great if you have a good quality DI (like a Radial JDI) but if you need to reamp it later and/or overdub this is also an option.
The singer is recorded in the mixing (or other) room with their signal coming back to the musicians’ headphones. If the quality of the singer’s track is not good enough they can be overdubbed later.

Why does this setup work so well?

Generally high schools students are not going to be good enough to record to a click track and retain a good feel, and they’re also not great at overdubbing instruments one by one. So this setup allows them to play all together as they would in a normal rehearsal room, hopefully creating a great groove.

But with our multi-room setup (i.e. having an amp room) we are able to record each instrument on to isolated tracks in our DAW so if one musician makes a minor mistake you don’t have to stop the take as you would if you had the amps in the same rooms as the drum microphones. Any minor mistakes can be cut out and re-recorded (or inserted from another take) just by the musician that made the mistake, without forcing the whole band to do another take.

Having all instruments on isolated tracks (without any ‘bleed’ from the other instruments in their tracks) allows us to fix timing and pitch issues with software like Celemony Melodyne.

On a recent session the bass player had huge trouble locking in with the drums. If the band had recorded to a click track it would be easy to ‘quantize’ the bass audio to the grid but as I said before, most high school bands aren’t good enough to be able to record to click well.

But using the new version of Melodyne 4 you are easily able to generate a ‘tempo map’ of the performance (most likely using the drum kit as your timing reference) which you can then quantize the bass to, making the two musicians perfectly in time with each other (even though they didn’t record to a click). I’ll do a full review of this software and walk through this process in a future blog.

If you want hands on, practical help with understanding how to create a recording setup like this I’m running workshops for teachers – Learning Ideas Teacher Training.

Collaborating With The Future Schools Expo

Posted on March 7, 2016 by Tom Adams

This week I was excited to receive correspondence from David Colville, from DataCom Australia. He was present at the 2016 Future Schools Expo in Sydney. His request was that a group of St Andrew’s College students could be made available to share ideas with small groups of students from Mount Sinai College, Sydney. These students had been taking part in one of four future challenges as part of the Maker’s Playground of this conference.

Collaborative Skype Session with Mount Sinai Hill College

The 4 Challenges:

There was a tornado in Sydney last year. Some houses were destroyed. What sort of house could survive a tornado?
We know that you learn better at school when you are happy, but some times you come to school sad because you might have had a fight with your brother or got told off by your Mum. How can we cheer students up when they get to school so they are ready to learn?
We love Lego, but cleaning up the pieces and finding the right one can be difficult. Is there a way to sort Lego pieces out quickly and make packing up our lego kits more effective?
We don’t have enough refs for our netball games. How can technology help our shortage of refs?

After a quick bit of organisation from preparatory school eLearning expert Wilj Dekkers, it was decided that our recently formed Year 8 Gifted and Talented group would be perfect for this opportunity. This group are working with Mrs Julie Rogers as part of the College’s GATE program.

The view from Sydney: Mt Sinai College students at Future Schools conference on a Skype call to St Andrew’s College

With only a few minutes preparation time afforded, it was great to see this small group of students independently agree to use the Collaboration Space on a OneNote Notebook, set up a dedicated area of this space so that they could collaborate on their ideas during the Skype Call, and then test the functionality of this space. This setup was all done independently of any teacher input and took only a few minutes.

The structure of the Skype conversation was simple. A small group of Mount Sinai students explained their solution to one of the problems described above, and the St Andrew’s students responded with their critiques, ideas and encouragements.

During the activity the students from both school were extremely engaged. They listened carefully to the input from all students and the questioning and reasoning on show was impressive. This activity was a really great example of students, in two different locations, displaying their collaborative and teamwork skills in an unfamiliar setting.

I liked the future problem solving Skype, because I enjoyed helping them with their problems to come up with better solutions. I also enjoyed discussing these problems with our group. We all put our solutions together to make the best one. Our group of year eights all had an input to help improve their solutions, because even if we didn’t want to say out loud, we had our OneNote to write our suggestions on, so our other group members could say it for us. – Maya, St Andrew’s College Year 8 Student

Here, at St Andrew’s College, we enjoying using Skype to connect with other Educators or Students across the globe. We have enjoyed a number of Mystery Skypes, have engaged with a children’s author, and brought experts into the classroom. We all look forward to the next opportunity to use Skype to help complement the other great learning that occurs in our classrooms!

Sprout – An Almost “Magical” Technology

Posted on March 2, 2016 by Sam McNeill

This week I’m in Melbourne, Australia and yesterday I spent the day at HP’s Experience Centre seeing a range of products (more to come on this), however there was one technology that genuinely blew my mind with the wide range of possibilities for application within Education.

This technology was Sprout by HP.

To get an idea of what this looks like, check out this promo video:

In short, Sprout by HP is an all-in-one computer with a touch screen but also has a built in downwards facing projector above the screen that doubles as a 3D scanner and an interactive mat that functions as a second input device and soft keyboard. This combination of technology allows you to do some crazy things, such as:

Take a photo of any “real world” object by placing it on the mat and then immediately start interacting with it in the software and adding it to other artefacts you’re collecting
- Example: you find a photo of a skirt you really like on the internet, but you want to see what it would look like if you made it in a fabric pattern you already have. Place the fabric on the mat, scan it, and then by drawing an outline over the skirt in the photo you can “punch out” the original skirt and insert the fabric pattern you just scanned.
Place a real object on the mat such as toy or wrist watch, scan it into the Sprout, and then start interacting with it in various ways by adding colour, textures and other filters.
- Example: you could scan a real world object, make some basic modifications, and then output these to a 3D printer so you can effectively “clone” real objects
Create collages with a combination of both existing digital images you already have, but add in scanned physical items around you and then mark up with text
- Example: in NCEA English students need to create static images (e.g. AS.90855 at Level 1) – using a Sprout they could truly combine all physical and digital artefacts and allow their creativity to take over.

An exemplar of a traditional Static Image for NCEA Level 1 English. A Sprout could revolutionise how these are created by combining both physical and digital artefacts

What was clear from the demonstration presented by Paul Burman from HP was that the Sprout is perhaps not the best tool for creating incredibly detailed and accurate finished products, but it is unparalleled in combining a range of features that would normally require exceptionally high skill levels in programmes such as Photoshop or AutoCAD.

For this reason, there is significant appeal for a device such as this in all year levels of schools, as I can see that students in our Preparatory School could easily apply their creativity to using this tool in effective ways. Likewise, Secondary School students in a range of curriculum areas could engage with this to very quickly create engaging conceptual designs using a range of media.

Below are some quickly taken videos from the presentation yesterday that illustrate a range of functions of the Sprout and, hopefully, how easy and relatively simply it is to quickly use. In the room watching was around 10 ICT Directors and Managers and all were riveted – most filming the presentation on their phones too – highlighting that this technology appears to bridge the traditional design / 3D print space and allow creativity to just flow:

Visualising a skirt re-designed with a physical fabric swatch

Scanning a physical object into a 3D model with Sprout by HP

Editing a photo from the web quickly with Sprout by HP

StAC e-Learning Stories

Innovative & Engaging e-Learning from St Andrew's College

Monthly Archives: March 2016